Welcome To b2b168.com, Join Free | Sign In
中文(简体) |
中文(繁體) |
Francés |Español |Deutsch |Pусский |
| No.8759114

- Product Categories
- Friendly Links
Information Name: | To supply EC2000RC polymer reinforced mortar |
Published: | 2012-03-15 |
Validity: | 0 |
Specifications: | 25kg / bag |
Quantity: | 1000000000.00 |
Price Description: | |
Detailed Product Description: | EC2000RC polymer reinforced mortar Features: 1, high temperature resistance, corrosion resistance, aging resistance and excellent performance. 2, high strength, good plaster operational. 3, good bonding properties of the original concrete structure. 4, no shrinkage, basic does not crack. 5, carbon dioxide, chlorides, such as through sex, can prevent the carbonation of concrete and to prevent corrosion of internal reinforcement of concrete. Mechanical properties similar to concrete, freeze-thaw resistance and durability good. Resistant to other chemicals resistance, very good, and this material is non-toxic, harmless to human body. Scope: 1, concrete structures reinforced plaster. 2, the permeability can be used with stainless steel wire mesh reinforcement. 3, for the repair of concrete structures, the surface of the cellular vulnerability exposed tendons and other defects in processing. Physical performance indicators: How to use: 1, in accordance with the proportion of water-cement ratio 1:4-5 add water and stir. 2, take a clean bucket, add the volume of water, while down while stirring, low speed (per minute 1000 rpm or less) electric stir Mix stick to stir for 3-5 minutes, let stand for 2-3 minutes, stir again. 3, according to the specific requirements of construction plaster or patch can be. 4, each ingredient should be used up within two hours. 5, the ambient temperature higher than 35 ° C, shading devices should be located to avoid loss of material in direct sunlight exposure Grouts scope of application: apply to indoor and outdoor fill the width of the tile joints of 1-12mm. Primary treatment: The grouts should be used in the tile adhesive to dry. Tile joints to clean, and there is no loose material. Note: * Stir well grouts used up within one hour. * Should be +5 ~ +35 ° C temperatures. * The grouts completed 24 hours of moisture conservation. Different tiles on the side of the water absorption level of mixed-level of how much the use of ambient temperature / humidity and water, may slightly affect the Color grouts curing. * This product contains cement and water produces an alkaline reaction, please note that the proper protection of the eyes and skin. Such as the skin is exposed to the slurry, the available water Rinse, such as the eyes coated with paste, please seek medical treatment and placed in a place away from the children. Construction Technology: 1, the whole package "the N300 colored grouts according to the following ratio into the appropriate amount of clean cold water, stirring until evenly without caking. Each 3 kg light gray grouts need to add water to 0.75 l, 3 kg every other color grouts need to add water to 0.87 l. The end of the rubber mat gray spoon to stir good grouts along the tile diagonally to squeeze into the reserved seams. Grouts after the initial curing, grouts the tile surface excess with a damp sponge to wipe clean. 4,24 an hour later, further clean with a dry cloth. Curing the N300 colored grouts waterproof. Important Notice: The company provides any print color model for customers to choose only reference but not as an acceptance in accordance with the actual products of each batch May be small changes, customer selection of products in real samples of this product may contaminate the tile surface, especially the surface roughness Porous, absorbent tiles and natural stone, marble and other construction shall be in strict accordance with the instructions provided for the operation should Demand, timely cleanup, if necessary, to do first local trials, the Company does not assume the improper operation of the responsibility of the contamination tile grouts. Shi Working hours must be in strict accordance with the instructions for use, fillers compaction, the process of the trowel, the Company does not undertake due to improper operation caused by pointing Agents loose, loss, out powder responsibility. |
Admin>>>
You are the 14631 visitor
Copyright © GuangDong ICP No. 10089450, The Beijing Swinge Special Engineering Technology Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility
You are the 14631 visitor
Copyright © GuangDong ICP No. 10089450, The Beijing Swinge Special Engineering Technology Co., Ltd. All rights reserved.
Technical support: ShenZhen AllWays Technology Development Co., Ltd.
AllSources Network's Disclaimer: The legitimacy of the enterprise information does not undertake any guarantee responsibility