Scope of application: 
 ★ fire-resistant, high temperature, for cellular, vulnerability and exposed tendons in concrete structures surface defects processing. 
 ★ concrete structures, stair step corrupted patch. 
 ★ bonded steel reinforcement and sticky carbon fiber reinforcement to do the bottom leveling. 
 ★ can be used as sea water, saline areas, and chemical plants and other corrosive environments, corrosion-resistant materials. 
 Product Features: 
 ※ with impermeability, frost, salt, alkali, weak acid corrosion resistance performance, and the cohesive force of a variety of materials strong. 
 ※ The thermal expansion coefficient and concrete approaches, it is difficult to disengage from these substrates to be bonded, and good durability. 
 ※ wet the substrate surface construction, without drying, can be hardened in wet conditions or underwater. 
 ※ non-combustible, not explosive, does not pollute the environment, harmful to human health. 
 ※ low cost, only epoxy mortar 30-50%. 
 ※ easy construction, and similar to ordinary cement mortar construction, easy to clean, the water can be cleaned. 

 Physical performance indicators: 

 Performance test results of test items 
 Flexural strength (Mpa) 28d 6.0 6.49 
 Compressive Strength (Mpa) 7d ---- ≥ 25 
 28d> 20 ≥ 35 
 Neutral resistance (mm) 28d <5.0 1.8 
 Bond strength (Mpa) at room temperature normal 28d 1.0 2.8 
 Hot and cold repeatedly 28d 1.0 2.4 
 Permeable volume (g) <20 15 
 24 h of water absorption (g/m3 and) 1000 525 
 Water absorption coefficient (kg/cm2 h0.5) <0.5 0.32 


 How to use: 
 ☆ Check the product packaging is intact, label verification. 
 ☆ open the lid, bucket bags marked A, B, and pre-batching remove. 
 ☆ A shake material, B material were poured into the bucket and stir evenly, and then marked with a "C" powder while stirring while slowly 
 Ground into the barrel, stirred into a uniform mortar-like can. If the mixture more viscous or difficult Stir the packaging may 
 Add 1-2kg of clean water, stir, does not affect the final performance of this product. 
 Note: 
 This product is cement-based materials, the fully hardened for 28 days. 24 hours using this product can be the next process. Marinated epoxy mortar should be used up within two hours, this time thickens to dry conditions can be added to the appropriate water Stir well before use. 
 Packaging and storage: 
 ★ The product packaging specifications 20kg / barrel. 
 ★ unopened shelf life of 12 months beyond the shelf-life shall be subject to inspection before it can continue to use. 
 ★ The product is nontoxic, odorless, non-flammable, non-explosive, in line with environmental protection requirements, according to the general cargo storage and transportation. 
 Projects: 
 Reinforcing the Great Wall, Beijing International Cultural Center, the Grand Hotel Beijing, China International Science Center, Guangzhou International Building, Tianjin People's printing plant, Cloud Lake Resort, MCC Building, Beijing, China, Tsinghua University teaching building.